+1 672-380-4815
[email protected]
⭐ Google Reviews
Concrete Waterproofing & Protection Systems

Concrete Waterproofing
& Protection — Every Surface

Penetrating concrete waterproofing and protection for every concrete surface — not just floors. Parkades, transit stations, university campuses, municipal buildings, retaining walls, and exterior facades. The same systems used on the Canada Line, EverGreen Line, Canada Place, and Pacific Centre.

Not a Flooring Service

This Applies to Every Concrete Surface That Exists

Every concrete surface — vertical walls, columns, parking decks, transit structures, building exteriors, underground infrastructure, retaining walls — is subject to deterioration from water infiltration, chloride penetration, carbonation, freeze-thaw cycles, and chemical attack. Left unprotected, concrete deteriorates. Protected correctly, it lasts for generations.

Our penetrating concrete waterproofing systems chemically react with the concrete matrix to create a hydrophobic barrier within the pore structure — not a coating on top. The result is permanent, internal protection that cannot peel, delaminate, or wear off. Applied with WashAway Xtreme preparation, DualGuard absorption takes 1–2 hours and the surface is immediately back in service.

We use Protocol Environmental Solutions' DualGuard and VersaGuard systems — the same products used on BC's most demanding concrete infrastructure projects.

Discuss Your Project
Reference Projects — Our Supplier's Systems
🚇 Canada Line — Olympic Village & Broadway-City Hall Stations
🚇 EverGreen Line — Rail Lines & Above/Below Ground Stations
🏛 Canada Place — Exterior Façade & Parkade
🛍 Pacific Centre — Managed by Cadillac Fairview
🅿 Easy Park — Vancouver Parking Garages
🎓 SFU Surrey Campus — Interior & Exterior Concrete
📚 Vancouver Public Library — Interior Stairwells & Public Areas
🏙 City of Surrey — Highway Retaining Walls & Water-Pumping Station
The Two-Step System

WashAway Xtreme™ + DualGuard™

Every concrete protection project follows the same proven two-step process. Step one prepares the surface. Step two permanently protects it.

Step 1

WashAway Xtreme™

Applied to the concrete surface to clean, degrease, remove efflorescence, and profile the surface to CSP 1–4. Opens the pore structure of the concrete to ensure DualGuard can penetrate to its full depth. The preparation step that makes the protection permanent.

  • → Removes oil, grease, and stains
  • → Removes white efflorescence deposits
  • → Profiles and opens concrete pores
  • → Prepares surface for DualGuard penetration
Step 2

DualGuard™

Sprayed onto the prepared surface with liberal coverage. Penetrates 1–3mm into the concrete matrix and reacts chemically to create a permanent hydrophobic membrane inside the concrete itself. The surface is left for 1–2 hours for full absorption. No topcoat, no colour, no visible change — just permanent internal waterproofing. ASTM C-1315 compliant.

  • → Penetrates 1–3mm — protects from inside out
  • → Permanent internal waterproof membrane
  • → Stops moisture, chlorides, and efflorescence
  • → Surface back in service within hours
Applications

Where We Apply Concrete Protection

Transportation & Transit
  • → SkyTrain stations — above and below ground
  • → Rail lines and bridge structures
  • → Highway retaining walls
  • → Parkade structures and traffic decks
Institutional & Municipal
  • → University and college campuses
  • → Municipal and government buildings
  • → Libraries, recreation centres
  • → Fire stations and civic facilities
Commercial & New Construction
  • → New slab moisture mitigation before coating
  • → Exterior concrete on commercial buildings
  • → Exposed columns and architectural concrete
  • → Efflorescence removal and treatment

Concrete Protection Project in BC?

We work with GCs, engineers, property managers, and government clients. Fast to mobilize, minimal disruption, permanent results.

Contact Us →